ECU: 91 TT Cali Spec pinouts

From 3000GT/Stealth Wiki
Jump to navigation Jump to search

The pinouts for a 1991 Mitsubishi 3000GT VR4 and Dodge Stealth RT/TT Cali-spec ECU.

Pinouts[edit]

Ecu-conn 94-95 Federal.gif

C-52 C-54 C-53
Pin 1 - No. 1 Injector Pin 101 - Engine Ignition Signal Pin 51 - Ignition Switch - ST
Pin 2 - No. 3 Injector Pin 102 - Valve opened or closed Pin 52 - Intake Air Temperature sensor
Pin 3 - No. 5 Injector Pin 103 - Muffler mode changeover Pin 53 - EGR Temperature Sensor
Pin 4 - IAC Coil <A1> Pin 104 - Ignition timing adjustment Pin 54 -
Pin 5 - IAC Coil <B1> Pin 105 - Wastegate solenoid valve Pin 55 - O2 sensor (front)
Pin 6 - EGR control solenoid valve Pin 106 - Check Engine Light Pin 56 - O2 Sensor (rear)
Pin 7 - Fuel Pressure control valve Pin 107 - Power steering switch Pin 57 -
Pin 8 - MFI Relay (fuel pump) Pin 108 - MFI relay (power supply) Pin 58 - Knock Sensor
Pin 9 - EVAP Solenoid Pin 109 - Pin 59 -
Pin 10 - PTU A (1-4) Pin 110 - Pin 60 - Backup Power Supply
Pin 11 - PTU C (3-6) Pin 111 - Turbo Meter Pin 61 - Sensor Impressed Voltage
Pin 12 - Power Supply (main) Pin 112 - Datalink connector (Yellow) Pin 62 - Ignition Switch IG
Pin 13 - GND (in) Pin 113 - Datalink connector (Pink) Pin 63 - Water Temperature Sensor
Pin 14 - No. 2 Injector Pin 114 - Anti-lock brake signal Pin 64 - TPS Sensor
Pin 15 - No. 4 Injector Pin 115 - AC Switch 1 Pin 65 - Barometric Pressure Sensor
Pin 16 - No. 6 Injector Pin 116 - Pin 66 - Speed Sensor
Pin 17 - IAC Coil <A2> Pin 67 - Closed Throttle Position Sensor (idle switch)
Pin 18 - IAC Coil <B2> Pin 68 - CAM Sensor
Pin 19 - MAF Flow sensor reset signal Pin 69 - CRANK Sensor
Pin 20 - AC Control Unit (AC switch 2) Pin 70 - Volume air flow sensor
Pin 21 - Fuel Pump Relay 2 Pin 71 - Ground (AT Inhibitor switch)
Pin 22 - AC Relay (magnetic clutch) Pin 72 - Ground (Sensor)
Pin 23 - PTU B (2-5)
Pin 24 - Electric load switch (input)
Pin 25 - Power Supply (main)
Pin 26 - GND (in)