HVAC: Repair Electronic AC Display

From 3000GT/Stealth Wiki
Revision as of 18:04, June 29, 2012 by Stealthify (talk | contribs) (Created page with "Category:How To Category:HVAC There is a resistor on the back of the circut board that needs replacement. Pull it apart and look for R-38. It may be burnt, and replac...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

There is a resistor on the back of the circut board that needs replacement.

Pull it apart and look for R-38. It may be burnt, and replace it with a 1ohm resistor.

Source:

Von(xwire) from us3s.org has done this on a couple of them with good results.