Engine: Troubleshoot Intake Air Temperature Sensor (IAT)

From 3000GT/Stealth Wiki
Revision as of 21:32, July 2, 2012 by Stealthify (talk | contribs) (Created page with "Category:How To Category:Engine ==Intake Air Temperature Sensor (IAT)== Image:IATStock01.gif Image:IATStock02.gif Image:IATStock03.gif [[Image:IATStock0...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Intake Air Temperature Sensor (IAT)[edit]

IATStock01.gif

IATStock02.gif

IATStock03.gif

IATStock04.gif

IATStock05.gif

Aftermarket IAT Sensor Wiring[edit]

If you want to use an aftermarket IAT sensor when replacing the stock MAF you want to wire it like this:

IATWires.jpg

  1. Green With Yellow Stripe: 5V power for Baro Sensor (Pin 61 on 91-93 ECU)
  2. Orange: Baro Singal to ECU (Pin 65 on 91-93 ECU)
  3. Blue with Yellow Stripe: Airflow Signal to ECU(Pin 70 on 91-93 ECU)
  4. Red: Power for Airflow sensor, (To Control Relay)
  5. Black: Ground for IAT, Airflow and BARO signal (Pin 72 on 91-93 ECU)
  6. Red with Blue Stripe: IAT signal going to ECU (Pin 52 on 91-93 ECU)
  7. Red With White Stripe: Air Flow sensor Reset Signal (Pin 19 on 91-93 ECU)
  8. Not used :

MAF18.jpg

Mafwires.jpg

Most Standalone ECUS use GM IAT Sensor[edit]

GMIAT.jpg

Found at GM parts Direct: http://www.gmpartsdirect.com/

GM IAT Sensor : 25036751 Pig Tail : 12102620

Retrieved from "https://www.3swiki.org/index.php?title=Engine:_Troubleshoot_Intake_Air_Temperature_Sensor_(IAT)&oldid=2042"