ECU: 94-95 DOHC Federal Spec Pinouts

From 3000GT/Stealth Wiki
Revision as of 13:03, April 7, 2019 by Albert0 (talk | contribs) (Created draft)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The pinouts for a 1994-1995 Mitsubishi 3000GT and Dodge Stealth DOHC Federal-spec ECU.

Pinouts[edit]

Ecu-conn 94-95 Federal.gif

C-52 C-54 C-53
Pin 1 - No. 1 Injector Pin 101 - Pin 71 - Ignition Switch - ST
Pin 2 - No. 3 Injector Pin 102 - Pin 72 - Intake Air Temperature sensor
Pin 3 - No. 5 Injector Pin 103 - VICS position sensor No. 1 (NA) Pin 73 - EGR Temperature Sensor
Pin 4 - IAC Coil Pin 104 - Pin 74 - O2 Heater
Pin 5 - IAC Coil Pin 105 - Pin 75 - O2 Sensor (Front) right
Pin 6 - EGR Solenoid Pin 106 - Check Engine Light Pin 76 - O2 Sensor (Front)
Pin 7 - Pin 107 - Power steering switch Pin 77 - O2 Heater
Pin 8 - MFI Relay (fuel pump) Pin 108 - MFI relay (power supply) Pin 78 - Knock Sensor
Pin 9 - EVAP Solenoid Pin 109 - VICS (Closed) (NA) Pin 79 - Left bank o2 sensor (cali)
Pin 10 - PTU A (1-4) Pin 110 - VICS (Opened) (NA) Pin 80 - Backup Power Supply
Pin 11 - PTU C (3-6) Pin 111 - VICS position sensor No. 1 (NA) Pin 81 - Sensor Impressed Voltage
Pin 12 - Power supply (main) Pin 112 - Pin 82 - Ignition Switch IG
Pin 13 - GND (in) Pin 113 - Pin 83 - Water Temperature Sensor
Pin 14 - No. 2 Injector Pin 114 - Pin 84 - TPS Sensor
Pin 15 - No. 4 Injector Pin 115 - AC Switch 1 Pin 85 - Barometric Pressure Sensor
Pin 16 - No. 6 Injector Pin 116 - Pin 86 - Speed Sensor
Pin 17 - IAC Coil Pin 87 - Closed Throttle Position Sensor (idle switch)
Pin 18 - IAC Coil Pin 88 - CAM Sensor
Pin 19 - MAF Flow sensor reset signal Pin 89 - CRANK Sensor
Pin 20 - Fan motor relay (Hi) Pin 90 - Volume air flow sensor
Pin 21 - Fan motor relay (Lo) Pin 91 - [ Park/Neutral Switch A/T) ]
Pin 22 - AC Relay (magnetic clutch) Pin 92 - Ground (Sensor)
Pin 23 - PTU B (2-5)
Pin 24 - Electric load switch (input)
Pin 25 - Power Supply (main)
Pin 26 - GND (in)