Difference between revisions of "ECU: 94-95 DOHC Cali Spec Pinouts"

From 3000GT/Stealth Wiki
Jump to navigation Jump to search
(Created page with "Category:How To Category:Electrical Category:ECU https://i.imgur.com/ur8I2wV.png ==Pinouts==")
 
m (added a plug)
Line 8: Line 8:
  
 
==Pinouts==
 
==Pinouts==
 +
 +
{| border="1px"
 +
|''C-52''
 +
|''C-53''
 +
|''C-90''
 +
|''C-54''
 +
|-
 +
|Pin 1 - No. 1 Injector
 +
|Pin 31 -
 +
|Pin 51 -
 +
|Pin 71 - Ignition Switch - ST
 +
|-
 +
|Pin 2 - No. 3 Injector
 +
|Pin 32 -
 +
|Pin 52 - Ignition Timing Terminal
 +
|Pin 72 - Intake Air Temperature sensor
 +
|-
 +
|Pin 3 - No. 5 Injector
 +
|Pin 33 - VICS position sensor No. 1 (NA)
 +
|Pin 53 -
 +
|Pin 73 - EGR Temperature Sensor
 +
|-
 +
|Pin 4 - IAC Coil
 +
|
 +
|Pin 54 -
 +
|Pin 74 - O2 Heater
 +
|-
 +
|Pin 5 - IAC Coil
 +
|
 +
|Pin 55 -
 +
|Pin 75 - O2 Sensor (Front) right
 +
|-
 +
|Pin 6 - EGR Solenoid
 +
|
 +
|Pin 56 - Data link connector
 +
|Pin 76 - O2 Sensor (Front)
 +
|-
 +
|Pin 7 -
 +
|
 +
|Pin 57 -
 +
|Pin 77 - O2 Heater
 +
|-
 +
|Pin 8 - MFI Relay (fuel pump)
 +
|
 +
|Pin 58 - Engine Ignition Signal
 +
|Pin 78 - Knock Sensor
 +
|-
 +
|Pin 9 - EVAP Solenoid
 +
|
 +
|Pin 59 - AC Switch 2 (AC clutch slip)
 +
|Pin 79 - Left bank o2 sensor (cali)
 +
|-
 +
|Pin 10 - PTU A (1-4)
 +
|
 +
|Pin 60 - Right bank o2 sensor(rear)
 +
|Pin 80 - Backup Power Supply
 +
|-
 +
|Pin 11 - PTU C (3-6)
 +
|
 +
|Pin 61 -
 +
|Pin 81 - Sensor Impressed Voltage
 +
|-
 +
|Pin 12 - Power supply (main)
 +
|
 +
|Pin 62 - Data link connector
 +
|Pin 82 - Ignition Switch IG
 +
|-
 +
|Pin 13 - GND (in)
 +
|
 +
|
 +
|Pin 83 - Water Temperature Sensor
 +
|-
 +
|Pin 14 - No. 2 Injector
 +
|
 +
|
 +
|Pin 84 - TPS Sensor
 +
|-
 +
|Pin 15 - No. 4 Injector
 +
|
 +
|
 +
|Pin 85 - Barometric Pressure Sensor
 +
|-
 +
|Pin 16 - No. 6 Injector
 +
|
 +
|
 +
|Pin 86 - Speed Sensor
 +
|-
 +
|Pin 17 - IAC Coil
 +
|
 +
|
 +
|Pin 87 - Closed Throttle Position Sensor (idle switch)
 +
|-
 +
|Pin 18 - IAC Coil
 +
|
 +
|
 +
|Pin 88 - CAM Sensor
 +
|-
 +
|Pin 19 - MAF Flow sensor reset signal
 +
|
 +
|
 +
|Pin 89 - CRANK Sensor
 +
|-
 +
|Pin 20 - Fan motor relay (Hi)
 +
|
 +
|
 +
|Pin 90 - Volume air flow sensor
 +
|-
 +
|Pin 21 - Fan motor relay (Lo)
 +
|
 +
|
 +
|Pin 91 - [ Park/Neutral Switch A/T) ]
 +
|-
 +
|Pin 22 - AC Relay (magnetic clutch)
 +
|
 +
|
 +
|Pin 92 - Ground (Sensor)
 +
|-
 +
|Pin 23 - PTU B (2-5)
 +
 +
|-
 +
|Pin 24 - Electric load switch (input)
 +
 +
|-
 +
|Pin 25 - Power Supply (main)
 +
 +
|-
 +
|Pin 26 - GND (in)
 +
 +
|-
 +
|}

Revision as of 18:52, February 3, 2016


ur8I2wV.png


Pinouts[edit]

C-52 C-53 C-90 C-54
Pin 1 - No. 1 Injector Pin 31 - Pin 51 - Pin 71 - Ignition Switch - ST
Pin 2 - No. 3 Injector Pin 32 - Pin 52 - Ignition Timing Terminal Pin 72 - Intake Air Temperature sensor
Pin 3 - No. 5 Injector Pin 33 - VICS position sensor No. 1 (NA) Pin 53 - Pin 73 - EGR Temperature Sensor
Pin 4 - IAC Coil Pin 54 - Pin 74 - O2 Heater
Pin 5 - IAC Coil Pin 55 - Pin 75 - O2 Sensor (Front) right
Pin 6 - EGR Solenoid Pin 56 - Data link connector Pin 76 - O2 Sensor (Front)
Pin 7 - Pin 57 - Pin 77 - O2 Heater
Pin 8 - MFI Relay (fuel pump) Pin 58 - Engine Ignition Signal Pin 78 - Knock Sensor
Pin 9 - EVAP Solenoid Pin 59 - AC Switch 2 (AC clutch slip) Pin 79 - Left bank o2 sensor (cali)
Pin 10 - PTU A (1-4) Pin 60 - Right bank o2 sensor(rear) Pin 80 - Backup Power Supply
Pin 11 - PTU C (3-6) Pin 61 - Pin 81 - Sensor Impressed Voltage
Pin 12 - Power supply (main) Pin 62 - Data link connector Pin 82 - Ignition Switch IG
Pin 13 - GND (in) Pin 83 - Water Temperature Sensor
Pin 14 - No. 2 Injector Pin 84 - TPS Sensor
Pin 15 - No. 4 Injector Pin 85 - Barometric Pressure Sensor
Pin 16 - No. 6 Injector Pin 86 - Speed Sensor
Pin 17 - IAC Coil Pin 87 - Closed Throttle Position Sensor (idle switch)
Pin 18 - IAC Coil Pin 88 - CAM Sensor
Pin 19 - MAF Flow sensor reset signal Pin 89 - CRANK Sensor
Pin 20 - Fan motor relay (Hi) Pin 90 - Volume air flow sensor
Pin 21 - Fan motor relay (Lo) Pin 91 - [ Park/Neutral Switch A/T) ]
Pin 22 - AC Relay (magnetic clutch) Pin 92 - Ground (Sensor)
Pin 23 - PTU B (2-5)
Pin 24 - Electric load switch (input)
Pin 25 - Power Supply (main)
Pin 26 - GND (in)
Retrieved from "https://www.3swiki.org/index.php?title=ECU:_94-95_DOHC_Cali_Spec_Pinouts&oldid=5459"